So, here are some of the tips that you have to keep in mind in order for you to properly install drywall in your home.
Firstly, you need to make sure that like on any project, you have to have all the things you need before you even attempt on starting the project.
The first tip that you need to keep in mind is to have a taping knife spreader. You will also need an application knife, joint compound, joint tape, and bread pan as well as a corner taping tool. These are the basic tools you need in order for you to install drywall properly.
Whenever you are installing drywalls, you have to make sure that all of your measurements are accurate. This can take some time to practice but once you get the hang of it, you will be able to get the panels installed tightly together and install it securely. Besides, nothing is more embarrassing to have the drywall you installed to fall down on while you have guests at home.
This is why you need to remember that the nails or screws you use should be long enough in order to keep the panels secured. The most important thing about installing drywall is that you have to feel secure about your project as they are secured on its foundation.
Another tip is that you have to strive for consistency whenever you are mixing your cement or your drywall mud. The mix should resemble an icing on cake and it should not be too stiff or too loose. To test its consistency, grab a trowel and scoop some mud with it. Hold it upside down and the cement or the mud should not fall down. And at the same time, the cement or mud should be easy to apply in to the drywall.
Instead of using paper tape, use mesh tape. Because this kind of tape is porous, it will allow the cement to seep through. This will provide you with a much smoother finish than by using paper tape, which is sometimes visually apparent.
For walls, you have to try and use more adhesives and less nails. The nails should only be used at the edge of drywall panels and for the rest of the drywall panels, use adhesives to hold it in place.
In order to hide the heads of the nails, try to hammer them down just below the surface. This will some time to perfect as you don’t want the nail heads to show but you also don’t want to hammer the nail in too hard that it can break the surface of the drywall.
These are basically the choices on how you can finish your drywall properly. By following these tips, you will be able to get a drywall finish that looks as if a professional did it. It may take some time to perfect but you will eventually get the hang of installing and finishing drywalls.
0 comments:
Post a Comment